Skip to main content

WRIST X-RAY

The basic projections are P.A and Lateral 

➢ Postero anterior (P.A):- The patient is seated along side the table with the affected side in contact with the cassette. Flexed the elbow joint and the arm is abducted, so that the anterior aspects of the forearm and the palm of the hand should be in contact with the cassette. The fingers are slightly separated to bring the anterior aspects of the wrist in contact to the cassette.

Centering point: - Center mid way between the median and lateral styloid process. 


➢ Lateral: - from the postero anterior the wrist is rotated externally to bring palm of the hand vertically, the hand is rotated externally slightly further to ensure that the radial and styloid process are superimposed.

Centering point: - Center to the lateral styloid process.





Radiological consideration,

The radiograph should demonstrate the all of the carpal bones clear and part of the metacarpal and forearm.


References:

MIT. Abdussalam A. Madaki and Cowen A.R (2019) Tutorial on the image quality characteristics of radiographic screen film combinations and their measurement, (medical Devices Directorate Evaluation report), MDD/94/34,ALTH.

Comments

Popular posts from this blog

HAND X-RAY

The basic projections are P.A and Lateral , ➢ Postero anterior (Dorsi-palmar P.A):- The patient is seated along side the table, the forearm is placed pronated on the table with the palmar surface of the hand in contact with the cassette. With the fingers slightly separated and extended to ensure that they remain in contact to the cassette. Centering point: - Center to the head of the third metacarpopalangeal joint. ➢ Dorsi-palmar oblique: - From the PA position the patient will now rotate his/her hand approximately 45° degrees, ➢ Another modified 15° degrees, Centering point: - Center to the 4th metacarpal bone. Essential image characteristics, The image should demonstrate the bones clearly and soft tissue outline no rotation or motion. References: MIT. Abdussalam A. Madaki and Cowen A.R (2019) Tutorial on the image quality characteristics of radiographic screen film combinations and their measurement, (medical Devices Directorate Evaluation report), MDD/94/34,ALTH.  

The Skull Anatomy

Learning Objectives For The Skull •  List and identify the bones of the brain case and face • Locate the major suture lines of the skull and name the bones associated with each. • Define sinuses and identify the location of each • Identify the bones and structures that form the nasal septum and nasal conchae, and locate of the hyoid bone •  Identifythe bony openings of the skull Anterior View of the Skull  Lateral View of Skull Bones of the Brain Case Parietal Bone Temporal Bone Frontal Bone Occipital Bone Sphenoid Bone Ethmoid Bone Sutures of the Skull Facial Bones of the Skull Maxillary Bone Palatine Bone Zygomatic Bone Nasal Bone Lacrimal Bone Inferior Nasal Conchae Vomer Bone Mandible Paranasal Sinuses Hyoid Bone The cranium (skull) is the skeletal structure of the head that supports the face and protects the brain. It is subdivided into the facial bones and the brain case, or cranial vault. The facial bones underlie the facial structures, form the nasal cavity, enclo...

X-ray Generators

The X-ray Generators delivers the electrical power to energize the x-ray tube and permit the section of x-ray energy, X-ray quality, and exposure time and dissipation rates specific to a generator and x-ray tube target housing. An x-ray generator is a device that helps to produce x-ray, together with an  x-ray detector, it is commonly used in a variety of applications including Medicine, x-ray, electronic assembly inspection, and measurement of material thickness in a manufacturing operators. Types Of X-ray Generators   • Single Phase Generators  • Three Phase Generators  • High-frequency Generators  • Constant Voltage Generators  - Single Phase Generators : - (also known as single alternator) is an alternating current electric generator that produce a single, continuously alternating voltage. - Three Phase Generators : - work by producing three separate waves of AC power that operate in a sequence ensuring that there is always a continuous flow of ene...